28mm 1940 German Motorized infantry

Although the vast majority of German infantry in 1940 (and indeed throughout the war) got around by the centuries-old expedient of boot leather, I decided I would motorize my German platoon. I opted for truck-borne infantry rather than putting them in halftracks, since the latter were even less common. Besides, when we are playing games that are meant to simulate the sharp end of the stick, infantry transport becomes as much eye-candy as anything else. I'm definitely of the school of thought that even panzer grenadiers with armoured halftracks didn't drive the damned things hell-bent-for-leather into the face of the enemy, guns a'blazin'! Once the infantry was engaged closely with the enemy (and probably, more often than not, even before the shooting started in earnest), the transport (whether trucks or halftracks) became, at best, a base of fire and/or a rally point. This despite the penchant for gamers to unload their infantry and advance on the enemy with the halftrack-mounted MGs grinding forward with them. 

To mount my infantry platoon, I turned to a number of different manufacturers. I picked up some Opel Blitz trucks from Army Group North Miniatures and a Horch staff car from Company B. The trucks are the usual AGNM high quality pieces; sturdy and easily assembled and painted. The Company B staff car, while wonderfully rendered and cast, was somewhat less sturdy than the AGNM vehicles. One of the side panels was broken in transit and required some judicious repair work. But for that, the model is quite a beautiful piece and will hold my platoon command quite nicely.

A couple of shots of the new trucks and Horch staff car. The latter will have a crew once I get them off of my painting desk. The StugIIIC in the foreground is an AGNM piece.

For my soon-to-be-painted pioneer squad, I chose the JTFM Sdkfz 251/7C. This is the pioneer version with the bridging pieces mounted on top. I thought this would be a good way to differentiate this squad from the others and provide it with a bit more protection (given that it will probably be given the tougher assignments).

The JTFM Sd 251/C pioneer halftrack. Until I looked at this photo, I hadn't noticed two things: I didn't finish painting the MG34 and the Dullcote seems to have left some white particles on the surface of the vehicle. I didn't notice them while I was handling it so maybe it's just the photo.

Recently, I was also able to purchase two PzIIIG tanks to supplement my armoured force. These mount the short 50mm gun. Granted, they shouldn't really be fielded with my 1940 Germans but if I were ever to face a 1941 Russian force, then they could give me a much-needed boost from my Pz38(t)s and PzIIs. I chose for these the AGNM models over the JTFM versions. I find the former to be sturdier and less fiddly to assemble (a function of the fewer parts and the one-piece hull/track casting).

AGNM PzIIIGs. These are quite nice models and come with extra stowage and tools to attach as one sees fit.

Also added was another Sd10 halftrack to help tow about my guns. I found in one of my desk drawers an extra Pak36 AT gun and a 75mm infantry gun. Both of these I mounted as limbered without the crews (which I didn't have anyway). 

Pak36 AT guns and 75mm IG towed by Sd10 halftracks. These will also have crews...eventually.

Next up for this project? hmmmmm.....nothing!

Do you have an ImagiNation?

For those not conversant with the idea of ImagiNation wargaming, shame on you! Essentially, a fictitious world is created, armies are built, uniforms developed, personalities formed and histories written. These nations or principalities can be geographically fictitious or based on historical countries. More often than not it seems that the mid-18th century is chosen for the historical genre of such ImagiNations but I have seem some set in 19th c. colonial periods, the ancient world, and even World War II. You can see a great example of this type of 18th century Imagination here or here.

So, why am I spouting off about this? I've contemplated this sort of project often over the years and, in fact, I did make a sortie into it once before. A number of years ago I built a 28mm fictitious Marlburian army, based on the French army of the period but with units named only after French cheeses, led by the Marquis de Fromage. The uniforms were based on contemporary fashions but with my own colour choices. Unfortunately, I could find no opponent to delve into this world of ImagiNations with me and I ended up selling the entire collection. Not so now! I'm working on persuading another interested party in pursuing this type of project again, at least on a limited basis to start. And nothing has been decided, even if we're really going to go forward with it. But it's fun to dream and plan. 

28mm Marlburian Imagination forces from a long-gone collection.

The Crusader SYW figures sold by Old Glory (and sold with the OG Army 40% discount) look quite inviting and would probably form the basis of a collection. During some down time at work today, I began to develop some uniform schemes for the first units in my army. I haven't even come up with a suitably tongue-in-cheek name for my nation/principality yet but it's premiere commander will be, of course, Le Marquis de Fromage!

Regiment Roquefort

Regiment Camembert

Grenadiers de Boursin

Cuirassiers de Brie

New Arrivals

I've been rather quiet on the gaming front of late, not regularly attending MIGS nor sitting at my painting desk. I've been fortunate enough to procure a very short-term contract for some work at York University. This fortunate event has a down-side: my hobby has reluctantly had to take a back seat. This whole working for a living thing sucks! On the bright side (for my hobby, at least), the contract is finished next week so I should be able to catch up on some projects on my desk over the Christmas holidays.

On the slate are a number of 1/56 vehicles for my WWII Germans along with some new guns for both the Germans and the French. Also to be tackled soon is the new 1:6000 naval collection. In fact, I received my order from Magister Militum yesterday, a mere 13 days after ordering. In a very small box (see picture below) were well packed Figurehead 1:6000 WWII ships. In fact, in that tiny box were more than 40 ships; enough to fill out the entire order of battle for Cape Matapan (I believe the largest naval battle of WWII in the Mediterranean). I'm waiting now for my custom cut bases from Litko. These will be of the same general style as for my 1:2400 WWI naval project but somewhat smaller. I have yet to decide whether to paint the bases or render them in Photoshop and print them on label paper. The former would probably be the easiest since I have already figured out the process for the WWI collection.

And soon to be discussed, the possibility of the notion of maybe, perhaps delving into the intriguing world of 18th century ImagiNations! More of that anon...

1:6000 WWII Naval

I received last week from the ever-friendly and helpful Ron P a bag full of Hallmark 1:6000 WWII boats. Thanks to Ron, the number of models I need to order for the Battle of Cape Matapan OB has been severely lessened. Thanks again Ron!

Littorio class Italian battleships.

My first impression when opening the package was, "Holy crap! These are damned tiny!" My second impression (after I put on my spectacles) was, "How do they get all the detail that small?" The largest ship in the batch is the Italian battleship Vittorio Veneto that measures in at a astounding 35mm long! How am I ever going to paint these? Of course, also on the question list is how to base them. The ships come with bases into which the ships fit, with molded waves. Very cool, but very small. Even with the bases the models are far too small for my stubby fingers to move about efficiently (and we won't even talk about Michael's bulbous bear paws!). So I need to devise a basing system that is easier to handle and looks good. My first thought is to emulate my WWI 1:2400 ship basing, but with slightly smaller bases. Probably the best way to go. But  I found an interesting basing idea here and I've included a photo from the site below. I like the way the graphics have been rendered and produced on a printer then attached to the base. The ship model is then placed on the "water." More to think on!

A New Project?

I've been rather quiet on the production front of late. I'm in one of my occasional painting slumps (of which I'm sure most of you are familiar) but I haven't been completely idle. I have, as always, continued gaming and you can see a few pics of a recent game below. I've  also been spending some time with planning, reading and research. Of particular interest to me of late has been the Mediterranean naval campaigns of WWII, specifically the Battle of Matapan in 1941 (you can see a short synopsis here). I have gamed in the WWII naval genre before using Victory at Sea but was unimpressed. In those games, we were using US and Japanese fleets and the action devolved into air power games. The naval aspect was definitely subsumed into the more uninteresting (at least to me) management of air assets. The Mediterranean campaigns between the Royal Navy and the Regia Marina seem to offer scope for capital ship engagements with limited air power resources (the Royal Navy had only one small carrier at Matapan and the Italians used only land-based bombers). The relatively small and self-contained scope of the operating theatre also appeals for campaign gaming. 

So, having (perhaps) chosen a new project, what scale? GHQ offers a comprehensive WWII range that has incredible detail and would seem to be the first choice. But I have happened upon the Hallmark range of 1:6000 ships (yes, that's three zeroes!) and I'm currently contemplating these little beauties (that you can see here to the left). While they have less detail than their larger GHQ 1:2400 cousins (duh!), they make up for that in their relative price point. The Hallmark ships are five or six times cheaper per ship than GHQ. The smaller scale has other advantages: 1) less storage space is needed; 2) a smaller playing surface is needed; 3) alternatively, the same space as needed for larger scales could be used...this would make for a more visually realistic (sic) playing surface, especially if aircraft carriers are involved.

What else is happening? The in-laws are preparing for their annual six-month Florida sojourn, leaving the basement en-suite apartment empty for the winter. I will again be transforming it into a temporary gaming room and workshop. There will be, of course, a gaming table but this time round I plan to also use the space for some larger terrain projects. Daniel plans to start on his WWI trench boards during his Christmas break and I would like to get a start on my new WWII buildings. Should make a lovely mess!

We played a 1940 scenario with Disposable Heroes on Sunday at MIGS. I hosted the game for two new and interested parties: Mark and Steve #2. Thanks guys for attending! I decided on a simple attack-defend scenario to introduce the new guys to the rules. You can see the central terrain feature in the picture above. Some of you may recognize this bridge from many WWII games in the past. Many a British paratrooper has given his all to defend (or capture) this bridge.

 

The German attack quickly received a serious blow. A French S-35 took its first shot of the game and destroyed  Steve #1's brand-spanking-new Neubaufahrzeug, a three-turreted German tank of extremely limted production-run, deployed during the Norway campaign (note: Before anyone mentions that this tank never appeared in the 1940 France campaign, it should be obvious from what I just wrote that I'm fully aware and don't really care!).

 The last moves of the game saw German panzer grenadiers assaulting the bridge under the cover of a smoke screen. The Germans eventually took the bridge in the waning moments, earning a marginal victory (there were still substantial French forces intact and nearby).

WWII Buildings

I don't usually make two posts back-to-back but I thought that since I had the camera out, I'd snap a pic of my next terrain project. While rooting around in some of my boxes at the club, I pleased to find some O-scale railroad buildings (yes it was aYule-like surprise there too!). I had bought these many years ago with the intention of adding them to my former WWII terrain collection. These are the perfect scale for 28mm skirmish gaming and will allow us to get out of the countryside and into some more urban-like game settings. The non-red and white buildings are all modular, meaning that the floors are interchangeable. They will need to be roughed up a bit and the signs changed (probably to French, given the 1940 focus of my collection). I'd also like to experiment with making them bomb-damaged. The red and white garage on top is an O-scale snap-together kit that will serve well in my French town. Anyone know where to get in-scale garage fuel pumps of the period?

I'll try and post in-progress photos of this project. Stay tuned....

The Spanish Fleet Has Arrived!

While I've bumming around between major projects, I've been trying to clean up a few other small ones that are either partly finished or never started. My 1/2400 Napoleonic naval is one of the latter. Vidal had talked me into purchasing the Spanish fleet for Trafalgar from Old Glory more than a year ago (see an earlier post for a picture of the unpainted ships). It wasn't til recently when he hosted a small game with his ships that I thought seriously of painting mine. Well, they're finished and itching to unleash the 136-gun behemoth that is Santissima Trinidad. This fleet also boasts three other first rate ships: Principe de Asturias (112), Sanata Anna (112), and Rayo (100). While these huge ships may seem impressive, the wretched state of training and seamanship in the Spanish navy at the time means that I'll have some serious trouble beating up on Vidal's Royal Navy dogs. At least my captains go into battle nattily dressed (at least in my mind's eye). The ships also tend to be somewhat more colourfully appointed than their English counterparts.

The Spanish fleet as fought at Trafalgar. The four first rates are on the right of the front line in the picture. The massive 136-gun Santissima Trinidad is farthest right.

On the WWII front, I attended MIGSCON on Saturday and was able to pick up a few accessories for my 28mm WWII forces. I found enough AGNM Opel Blitz trucks to motorize my German platoon and I also picked up two Pzkpfw IIIs with the 50mm gun. One of the latter is actually Alex's (which I will paint for him as I do my own). I also purchased a pioneer halftrack for my upcoming German engineer squad. This is only a single squad of 10 figures, meant as an add-on for my German platoon for specific scenarios.

Aside from my MIGSCON purchases, a thorough searching of various drawers and boxes in and around my painting desk yielded some other surprises. I now have in my painting queue (besides the aforementioned vehicles and engineer squad), another Pak36 37mm AT gun and 75mm infantry gun. The plan is to mount these on separate bases in limbered mode to replace my current crewed models when in towed configuration. Hiding away in one drawer was a Pzkpfw IVF2. This model has the 75mm L43 gun with the earlier conical (or ball-like) muzzle brake. Looking at the AGNM site, I noticed that this model is not listed. The model I have may be from a test batch that Vince may have run a few years ago. If that's true, it's odd that they're not offered for sale.

And maybe I could persuade Alex to take the Pz IV in exchange for his Pz III (allowing me to build the PzIIIs with short and long 50mm guns respectively...hmmmm, Alex, are you reading this? The Pz IV would go well with your later war Germans!).

My desk drawers have been a bit Yule-like of late since I also found very nice models of a Pak38 50mm AT gun and a Sig33 150mm Infantry gun, both from AGNM. The former should give my German infantry a bit of added punch should they run into any Russian armour in the future (seems likely, given Steve's armour output). The SIG33 will probably have little tactical use in our games but could make a nice scenario-driven objective or just look damned mean and dirty on the table.

Pak38 50mm AT gun from AGNM.




SIG33 150mm infantry gun from AGNM.